Exo Full Body Harnesses PHES5
Insulated full-body harness support for selected work-at-height tasks, combining waist support with fall protection and fall arrest considerations.
Integrated harness support for demanding height-work environments.
PHES5 is an exoskeleton for electrician back support and full-body harness applications. It is positioned for selected work-at-height tasks such as roof maintenance, scaffold erection and dismantling, welding beams and columns, and roof truss climbing.
Because PHES5 is used in work-at-height contexts, IEH recommends a careful review of work procedures, PPE compatibility, fall protection requirements, fall arrest planning, worker fit and task suitability before deployment.
Designed for waist support, tool carrying and selected work-at-height tasks.
The waist protector disperses pressure on the waist while the elastic belt provides support during bending. The system also serves as both a fall protection and fall arrest system with a carrying belt for tools.
Exoskeleton for Electrician Back Support Full Body Harnesses Insulated — PHES5.
Work-at-height support profile
Ideal for working at heights, the Exosuit is suitable for tasks such as roof maintenance, scaffold erection and dismantling, welding beams and columns, and roof truss climbing. The waist protector disperses pressure on the waist, while the elastic belt provides support during bending.
Original feature profile
System role: Fall protection and fall arrest system with carrying belt for tools
Materials: Durable, weather-resistant and impact-resistant materials
Visibility and documentation: Reflective strips and document holder
Waist support: Waist protection system helps reduce lumbar strain from carrying tools
Insulation: Waist Protection Exosuit with insulation
Designed for selected height-work tasks where support and compatibility are critical.
Roof maintenance
For selected roof maintenance tasks where work-at-height controls and task suitability have been reviewed.
Scaffold work
For selected scaffold erection and dismantling tasks subject to appropriate procedures and controls.
Welding beams and columns
For selected structural work where tools, posture and fall protection compatibility are assessed.
Roof truss climbing
For selected climbing-related tasks requiring careful site-specific and task-specific review.
Specialist features for work-at-height applications.
PHES5 should be deployed only after reviewing task demands, fall protection compatibility, rescue planning and site safety procedures.
- Elastic belt for waist support.
- Shoulder straps with built-in thick cotton lining and shoulder socket to distribute force evenly.
- Back panel middle layer equipped with high-density Velcro to adjust elastic belts and lumbar back cushions.
- Elastic belt pulling force is adjustable, with maximum pulling force of 15 kg.
- Anti-sway webbing for storage to help prevent shoulder strap slipping.
- High-strength aviation aluminium O-hook that is light in weight, corrosion-resistant and tightened by a nut.
- Fall arrest bag opens automatically during a fall to reduce impact.
- Waist Protection Exosuit with insulation.
Key PHES5 visuals retained in a premium slider.
The redesigned page presents the original Full Body Harnesses visuals in a cleaner full-width slider format.
Integrated support for selected work-at-height applications.
PHES5 is best positioned as a specialist option where work-at-height requirements, tool carriage, waist support and fall protection compatibility must be reviewed together.
| Support Area | Positioning | Key Difference |
|---|---|---|
| PHES5 Full Body Harnesses | Insulated full-body harness exoskeleton for selected work-at-height tasks. | Combines waist support, tool carrying, fall protection and fall arrest system considerations. |
| Use Profile | Suitable for selected roof maintenance, scaffold work, beam and column welding, and roof truss climbing. | Best deployed after work-at-height procedure review, compatibility review, fit review and pilot validation. |
Deploy through assessment, not assumption.
PHES5 should be considered as part of a broader work-at-height, ergonomics and safety control strategy. It should not replace proper work design, fall prevention planning, rescue planning, safe work procedures or worker training.
Before wider deployment, IEH can support task and posture screening, PPE compatibility review, worker fit review, pilot validation, wearing guidance and post-pilot recommendations.
- Task and posture screening
- Work-at-height and fall protection compatibility review
- Tool carriage and waist-support review
- Worker fit and comfort review
- Pilot trial and feedback collection
- Training on wearing, adjustment and limitations
- Post-pilot recommendation before scale-up
Find out whether PHES5 suits your work.
The right exoskeleton, implemented the right way, can support sustainable work performance and help organisations manage selected work-at-height tasks more responsibly.
- Work-at-height task selection
- PPE and fall protection compatibility review
- Real-work pilot validation
- Fit, comfort and worker acceptance review
Note: Product suitability depends on the task, worker, work environment, work-at-height requirements, rescue arrangements, PPE, existing controls and safe work procedures. Final deployment should be assessed before use.
EXO-FULL BODY HARNESSES
EXOSKELETON FOR ELECTRICIAN BACK SUPPORT FULL BODY HARNESSES INSULATED – PHES5
Ideal for working at heights, the Exosuit is perfect for tasks like roof maintenance, scaffold erection and dismantling, welding beams and columns, and roof truss climbing. The waist protector disperses pressure on the waist, while the elastic belt provides support during bending. It also serves as both a fall protection and fall arrest system, equipped with a carrying belt for tools. Made from durable, weather-resistant, and impact-resistant materials, the Exosuit features reflective strips and a document holder. Its waist protection system helps reduce lumbar strain from carrying tools, minimizing the risk of intervertebral disc herniation.
FEATURES
- Characteristics: Elastic belt for waist support；
- Shoulder straps: built-in thick cotton lining, shoulder socket, distributes the force evenly；
- The middle layer of the back panel is equipped with high-density Velcro to adjust the position of the elastic belts and the lumbar back cushions;
- Elastic belt pulling force is adjustable. Maximum pulling force 15 kg;
- Webbing for storage: anti-sway, prevent the shoulder strap from slipping off;
- Characteristics：Waist Protection Exosuit;
- Aviation aluminium O-hook – high-strength aviation aluminium, light in weight, not easy to corrode, tightened by a nut;
- Fall arrest bag – When a fall occurs, the fall arrest bag automatically opens to reduce impact;
- Waist Protection Exosuit with insulation.